Configuring a Samsung ITP 5121 IP telephone.

 

You must access the ITP 5121 telephone menu screen to set the information required for the phone to log into the Samsung phone system. While applying power to the phone press and hold the menu key until you see !!BOOT SETUP MENU!!.

 

Press 1 on the telephone key pad to access the system easy wizard.

“System easy setup start, press OK when selected” will be displayed.

Press the ENTER key to continue.

 

From here you will have 2 options, Press 1 for manual IP or Press 2 for DHCP.

Most commonly you will choose 2 for DHCP, if the network you are connecting the IP telephone to requires a static IP this must be obtained from the network administrator. In this example we will assume DHCP, press 2 on the keypad.

 

“DHCP MODE SELECTED, PRESS OK” will be displayed, press ENTER.

 

“Input server IP address” will now be displayed. If there is an IP address already listed here you must use the left arrow to backspace to the beginning of the IP address line on the display.

 

Using the keypad enter the IP address of the telephone system, this address will need to be given to you by either the network administrator or the telephone technician. Use the * key in place of a dot, or period.

Example: 192*168*1*250 would be the same as 192.168.1.250

 

Press the ENTER key after you have entered the IP address of the phone system.

 

INPUT SYSTEM ID will be displayed next. By default the system ID’s for the ITP 5121 and other IP phones start at 3201, this also matches the default extension numbers assigned to these phones. You will need to verify this information with your system administrator. In this example we will enter 3201.

Press ENTER after you type in the user ID.

 

INPUT SYSTEM PASSWORD will be displayed next. The default is 1234, but check with your administrator to be sure, press ENTER after typing in the password.

 

EASY INSTALL IS END

PLEASE PRESS OK FOR REBOOT

this will be on the display, press ENTER and wait for the phone to reboot.

 

Make sure the network cable from your wall jack is plugged into the LAN port on the bottom of the ITP phone before rebooting.

 

The phone may take several minutes to reboot, you will see the extension number as well as the time and date appear on the phone after a successful log in. After several minutes if you see a message saying “retry count” verify all your information and follow the steps again.